Cleaning instructions for tumbler cup and cup lids and chug caps
HOW TO CLEAN YOUR Stainless steel tumbler
FOR EASY CLEANING
Our stainless steel tumbler are so easy to clean that they can be washed in the dishwasher.
If you don’t have a dishwasher, a mild dish soap and a soft metal-free cleaning brush can also be done.
How to clean stubborn coffee and tea stains?
For hard-to-remove coffee or tea stains, here’s how.
- Pour in the dishwashing liquid and let it sit for a few minutes, allowing the dishwashing liquid to mix with water to break up stubborn coffee and tea stains.
- After a few minutes, do not pour out the detergent solution first, use a cleaning brush to penetrate into the inner tank of the stainless steel tumbler to wipe stubborn stains, and then pour out the detergent solution after wiping is completed.
- After pouring out the detergent solution, rinse the stainless steel tumbler with clean water 1 to 2 times, and then wipe off the water stains to complete the cleaning.
Our stainless steel tumbler basically won’t rust, but if rusted, it can be treated like this. Buy a polishing cloth and polish it a bit.
HOW TO CLEAN YOUR cup lid and chug cap？
Cleaning Instructions for Replacement Lid
Our range of tumbler cup lid accessories are all dishwasher safe, making cleaning easy if you have one.
The replacement lid cleaning is very simple, you can wash the entire cover in water, and you can complete the cleaning with the cleaning brush.
- Pour the detergent into the cleaning appliance, put in clean water, and place the replacement lid to soak for a few minutes.
- Wipe all parts of the lid with a cleaning brush, and then rinse with clean water 1-2 times to complete the cleaning.
- If you want a more thorough cleaning, you can remove the black gasket on the replacement cover for a more detailed cleaning.
Note: The installation method of the black sealing rubber ring is shown in the figure below.
Cleaning Instructions for Magnetic Lid
Magnetic lid accessories, since the magnetic sheet is detachable, it can easily complete a more thorough cleaning.As shown below.
- Break apart the black magnet pieces on the upper and lower parts of the magnetic lid by hand.
- Remove the black sealing ring together.
- Put all disassembled parts in the dishwasher.Or hand wash with detergent.
- The magnet installation method is very simple, just align it up and down to snap together.
Cleaning Instructions for Chug Cap
The chug cap is divided into upper and lower lids, the upper part is a bottle cap with a handle, and the lower part is a narrow mouth and a protruding mouth. Can be separated into two separate cleaning, more thorough.
- Unscrew the handle lid on the upper part first, and then remove the black sealing rubber ring under the thread.
- If you have a dishwasher, put the removed parts in the dishwasher for cleaning.
- If you don’t have a dishwasher, you can wash it manually using a detergent and a brush.
- Install the parts after they are dry to avoid residual water stains on the parts to breed bacteria.
HOW TO CLEAN YOUR metal straw？
Whether it is a metal straw or a straw spoon, it is very convenient to clean.Since they are all dishwasher safe, if you don’t have a dishwasher, you can also wash them by hand, using our included cleaning kit.
- First put a metal straw or grass spoon into clean water, drop an appropriate amount of detergent, and soak for a few minutes. For the spoon part, the head of the spoon can be removed for more thorough cleaning.
- Use our included special cleaning brush to reach into the metal straw and wipe it back and forth for a thorough cleaning.
- After cleaning, wipe the straw clean and let it dry before use.
- For metal straws with colored surfaces, be careful not to use rags containing metal or abrasive ingredients when wiping the straws, so as not to discolor the surface of the straws due to wiping.
other information
1.For information on other questions, go to the FAQs page.
2.Or check out our help guide for what you need to know.
